The Steel structure warehouse building floor consists of covering the floor of a logistics system with indications. This security measure minimizes possible risks in the warehouse and, in turn, serves to organize the space.
To avoid risks in the warehouse, surfaces intended for storage tasks or areas where movement equipment and pedestrians circulate must mark and visually differentiated.
Let’s see what the signs look like, what regulations they must comply with and what are the advantages of a properly signposted warehouse.
The warehouse floor signage is a way of delimiting the work areas. It is a safety measure that fulfills the function of helping operators and alerting to risks in a very visual, clear and obvious way.
All areas where there may be a risk for operators are marked, such as the location of hazardous substances and products. Emergency exits, areas where there are obstacles and places where fire systems indicate to make them easier to locate.
It is advisable to sign only the essential areas of the Steel structure warehouse building, as excessive signage could confuse operators who regularly work on the installation.
A, Increase security. Signage is an occupational hazard prevention measure. For example, by preventing operators from crossing forklifts, being run over avoids.
Organize space. Delimiting work areas helps maintain order. It is essential that the warehouse is well organized, as a good distribution positively influences all activities.
As everything is common, operators know where to go, which increases the speed of transfers and, consequently, productivity.
The constant movement of people and products in the warehouse increases the probability of accidents (especially collisions and falls). According to Eurostat, in Europe there are 300,000 accidents in the logistics sector every year. Part of these accidents happen when moving from one point to another in the warehouse.
To avoid any risk, there is no doubt about the effectiveness of Steel structure warehouse building signage.
The warehouse floor comes in different ways. Thanks to safety regulations, dangers, prohibitions or information are represented in different shapes and colors, as in traffic signs. So, for example, if we see a triangular sign, we know it’s a danger warning. On the other hand, if it’s square, it’s informative.
Normally, the marking comes with special resin-based paints, as they are more resistant to wear and abrasion. With the help of a demarcation machine or with molds, lines are drawn to delimit the areas. These paints must prepare for the passage of vehicles and must not be slippery.
Anti-slip adhesives are also common, especially resistant to water, extreme temperatures and sun exposure. They usually come directly on the ground or on stairs because, as they are non-slip, they minimize slipping. They can be of different colors, mainly yellow and black to warn of the danger of falling or tripping.
Before marking the Steel structure warehouse building floor, the first thing to do is to document and know the legal standard in force. For example, it is essential to know the colors that is easy to use or the areas that must be different to meet industrial signage.
Next, the distribution and organization of the warehouse space must evaluate to identify possible risks.
The next step is to choose the appropriate type of signage (paint or masking tape). Your choice will depend on the characteristics of the floor and whether the marking is temporary or permanent. Companies with frequent changes in the organization of their warehouse tend to opt for adhesive tapes.
Ideally, the Steel structure warehouse building is at room temperature for the application of paints or adhesives. Likewise, it is essential that the floor is clean and dry, free of dust, grease or oil to facilitate its fixing.
Finally, the logistics manager is responsible for reviewing the floor markings to control their correct condition and ensure proper cleaning.
Overstock is the state of the warehouse when the raw material and finished goods stored at the facility far exceed demand. In this context, product inputs exceed outputs and the warehouse becomes a bottleneck.
This is due to poor planning or lack of coordination between the sales, logistics and production areas, among others. An overstock error due to not assigning the proper turnover to a product is a common failure in many companies. In fact, overstocking often occurs at facilities that supply or store network-produced products.
Excess inventory comes by multiple causes, for example, product seasonality, brand reputation, the entry of new agents in the market or the deterioration of socioeconomic conditions in a given market.
In this sense, we can group the conditions that lead to excess inventory into two large groups:
Fa external producers: originate from other people’s socioeconomic changes to the company’s activity. In this case, the Steel structure warehouse building still has the same stock marked in the logistical planning, but the demand for the product is no longer the same.
This leads to a situation where the warehouse must reallocate orders for goods in and out to balance the mismatch. An example of this would be a change in fashion or an economic crisis.
Fa domestic producers: result from errors in the organization of the company. They can be failures in logistics (poor inventory management) or in the sales/purchasing department, which made a mistake in its growth forecasts.
The multiplication of sales channels, that is, omni channel, changed the bidirectional relationship between customer and company. Today, organizations must maximize their efficiency to remain competitive in an increasingly complex environment.
Therefore, one of the first logistics strategies that every company must specify is how to optimize warehouse resources. It is best practice to save resources. It is in this context of increasingly diversified warehouses. Companies must invest in new methodologies. This allows them to be efficient even when they do not have stock of all their SKUs.
Customize your own Project now: lee@hy-steel.cn
Hongye Steel Structure is located in Dongguan and has more than 15 years of experience in the field of steel structure. We can provide customized product solutions for customers from all over the world.
lee@hy-steel.cn