Construction of warehouse structure

Construction of warehouse structure
Determine the basic design parameters of a store structure based on factors such as storage layout, type of storage, frequency of entry and exit of storage, type of shelf, operating system, operating procedure, and fire protection requirements.

1. Storage space
The design of a warehouse structure should determine the location according to the overall layout of the warehouse, the type and amount of the warehouse, and the process of operation. It should not be less than 1,000 square meters.

2. Wide design of the warehouse structure
Span division and steel storage columns should be designed according to functions, shelf structures, operating procedures, etc., taking into account economic and safety requirements, width should be 20m-30m, column space should be 7m- 9m, support between columns and diagonal support Should not cause obstacles to installation of racks and warehouse operation.

3. Design length of warehouse structure
The total length of the warehouse building should take into account factors such as storage size, storage section, shelf type, functional equipment, etc., and should be at least 6m.

4. Design of floor warehouse structure
The minimum load capacity of the warehouse should be determined according to the storage category, type of shelf, loading and unloading equipment, and other factors. It should not be less than 3 tons / square meter. The floor should be designed and maintained in accordance with the requirements of stored storage of dust, moisture, and constant electricity and improve and extend the efficiency of the work. The basic requirements are: the floor is flat, it will not wear out, it will not collide, and it will not have sand; non-toxic and environmentally friendly materials should be used when handling floor storage. When the apparent height of the warehouse is more than 9m, and the horizontal shelves are used, we should treat the warehouse with ultra-leveling flooring.

5. Design of door warehouse structure
The design of the warehouse building should take into account the type of door from the warehouse, the type of storage, the frequency of goods entering or leaving the warehouse, the process and operation, fire protection requirements, overall economy, and other factors. . You can choose dual industrial lift doors and electric doors, folding doors, or sliding doors. It should not use turning doors. There should be no 6 warehouse doors per 10,000 square meters each. In line with the requirements for the development of the warehouse, it must retain the position of the depot departments in order to transform the future; according to the type of warehouse stage, equipment, and category of goods, the door width should not be less than 2.75m, and the height should not be less than 3.5m.
6. Canopy
The door to the warehouse or warehouse should be fitted with a rain-resistant shed, and the length and width should meet the operating requirements of rain and snow. Its working width (from the outer edge of the store door or shed stage to the outer edge of the rain shed) should not be less than 2.5m, and the apparent height from the ground should not be less than 5m.

7. Warehouse roof system
The structure of the warehouse should determine the roof plan according to local climate, stored goods, operating lights, and fire protection requirements. It must use materials or components that have good waterproof performance and are compatible with drainage.

The slope should not be less than 3%, and you should use a water-resistant roof and a drainage system on the roof, such as an outdoor drainage and downspout. The ceiling light panel on the roof should avoid being in the same location as the fireplace and should be installed directly above the library channel. The daylight panel should calculate at least 2% of the roof area.