How are prefabricated warehouse buildings constructed?

Steel structure warehouses have recently become a popular choice in the construction of many warehouses due to the continued popularity of prefabricated steel structures. Prefabricated warehouse buildings have the advantages of low cost and rapid construction when compared to conventional brick-concrete structures. Better than the conventional brick-and-concrete warehouse is the prefabricated structure warehouse.If you are interested, you can read this article <Modern prefab steel warehouse VS Traditional concrete warehouse> for more information.

So how exactly is a prefabricated steel structure warehouse built? So, today we’ll discuss the steps involved in building a warehouse with a steel frame:

【1】Obtain a land use permit

No matter where you are in the world, the first step in building a house is to review the land use rights, as this will ensure that the construction of our home is legal and prevent any future complications that are not necessary;

【2】Design drawings finalized

Investigate the local environment, topography, terrain, and other elements before beginning construction on a prefabricated warehouse buildings. You should also consult with the client to develop a preliminary design plan. The next step is to determine the drawings, communicate with the client, and finalize the draft at the steel structure construction company.

【3】Schedule production warehouse prefab kits

The steel structure company will arrange for the production of the components once the drawings have been decided upon. The production process used by the current steel structure company is an industrialized assembly line, which guarantees the coherence of the steel structure and the quality of the parts that make up each part.

【4】On-site construction and construction

Transported to the construction site for construction and installation are the processed steel components. The construction process is significantly accelerated using the “production-build” method, which also lowers labor costs and construction site meetings. The waste generated by construction is consistent with modern society’s social goals of conserving energy and protecting the environment, as well as with the idea of environmentally friendly prefabricated buildings.

What key technological procedures go into building steel structure workshops? The following is a summary:

• 1.Layout of the construction: Theodolite and level are used for positioning in accordance with the design requirements and the requirements of the drawings, and after the axis and elevation can be determined, the position of the steel frame footing can be confirmed.
• 2.Embedded components of the foundation: In order to prevent pollution during the concrete pour, the embedded bolts should be fixed to the appropriate size and wrapped before the foundation concrete is poured. It’s important to promptly clean up any small concrete remnants left at the pre-drilled holes for screws and bolts after the concrete has been poured.
• 3.Hoisting a steel column: To begin, we must confirm the location of the component hoisting point and implement the necessary safety precautions. After raising the steel column, place it close to the anchor bolt, center it there, perfectly center the mounting hole on the bolt, and then gradually lower the hook. Once the bolts have been calibrated, tighten them.
• 4.Steel beam installation:The steel beam is lifted after the steel column has undergone a second inspection, and its two points are then symmetrically tied. The butt adjustment and correction can be carried out once the steel beam and the steel column datum plane are aligned, after which they are fixedly connected.
• 5.Purlin installation: When installing a purlin, the sample rod can be moved forward and backward along the purlin, the error can then be adjusted by tightening and loosing the bolts, and finally the error can be fixed and corrected with bolts.
• 6.Install the wall panels: Work your way from the gable at one end to the other, primarily. In the initial stages of construction, it is necessary to make the transition using the operating platform and to check that the top plate is parallel and installed through the cable vertically. To prevent scratches, it is best to shape everything at once and handle carefully.
• 7.Painting in the workshop: first clean the stains off the metal surface, then apply anti-rust paint. Start scraping the putty as soon as the anti-rust paint has dried. After the putty is dry, sand it flat. Apply a primer that is anti-phosphating last.

【5】 Testing and endorsement by pertinent departments

Once the product is delivered to the site, construction can begin immediately. After the completion of the acceptance stage. The construction acceptance of the prefabricated warehouse buildings is completed by the relevant quality supervision department, and it will be delivered for use after the acceptance is passed.