The 1990s was the high-speed stage of the development of China’s market economy. At that time, a large number of steel structure warehouses were built. As time went by, these warehouses became increasingly aging. Undoubtedly aggravated the load of the steel structure warehouse, which caused the phenomenon of water leakage in the warehouse. Today we will talk about how to solve the warehouse leak.
There are many reasons for water leakage, the most important ones are: unreasonable design scheme, incorrect construction and installation, and inadequate daily care and maintenance.
1.The designer did not consider the local seasonal climate issues thoroughly during the design, and the drainage pipes designed in the design of the roof drainage system are insufficient, which can only supply the normal rainwater load. When encountering extreme weather such as torrential rains and other extreme weather, the amount of rainfall is heavy and it falls quickly, and the drainage pipes on the roof will accumulate rainwater and flow back, resulting in hidden dangers of water seepage inside the drainage ditch. There are two ways to solve this problem at this time: one is to increase the number of drainage pipes, and the other is to redesign the size of the drainage pipes according to the specific situation.
2.The type of the daylighting panel does not match the type of the roof panel. The wave peaks on both sides of the daylighting panel are higher than the roof panel. After installation, the sealing transition causes the air pressure difference of the daylighting panel. If this happens, add waterproof screws on the upper part of the wave crest. Quantity, in order to prevent the occurrence of water leakage.
At that time, the workers did not use the correct installation method during construction and installation, and after years of wind and sun exposure, the color steel plate shrank and deformed, and the joints and lap joints were displaced, resulting in roof leakage. How to solve the warehouse leak? The solution is to reposition the color steel plate at the leaking part, and for capillary water, welding or cement can be used to repair the leak.
The steel structure cannot be used to the end after the construction is completed, and it needs to be maintained and repaired regularly. In order to save money, maintenance is not done regularly, which is one of the reasons for roof leakage. The reasons for this factor are: too many roofs, resulting in blockage of sewer pipes, rainwater backflow, failure to deal with it in time, resulting in rain leakage over time. The solution to this is: it must be maintained strictly and regularly, and it cannot cause greater losses in order to save money.
The above is how to solve the warehouse leak. Nowadays, China’s steel structure technology is becoming more and more mature. Before the design, the designer will go through a lot of research and investigation and finally come up with the optimal solution. Even if the above problems really occur, even if you contact the steel The structure manufacturer can do the follow-up repair work.
Customize your own Project now: lee@hy-steel.cn
Hongye Steel Structure is located in Dongguan and has more than 15 years of experience in the field of steel structure. We can provide customized product solutions for customers from all over the world.
lee@hy-steel.cn