With the continuous innovation and development of modern technology, steel structure processing plants have also benefited from it. More and more modern machines have entered the processing plant, which greatly saves the working time and efficiency of workers. Today, the editor will tell you about the double cantilever H-type submerged arc welding machine, and describe its use and protection and measures for daily maintenance in an all-round way.
Double cantilever welding machine is an ideal equipment for combined submerged arc welding of large H-beams. The operation process is also quite standardized. Workers place the steel components to be processed on the support frame, and the steel components are automatically tilted by 45° so that the welds are in the boat-shaped welding position. The welding arm equipped with the submerged arc welding head can move up and down horizontally on the beams on both sides of the gantry, so that the welding nozzle on the machine head is aligned with the welding seam. The front end of the welding arm is equipped with a mechanical automatic tracking device for the welding seam, and then the T-shaped gantry moves horizontally on the track for automatic welding.
Operation precautions
1. Staff who use double cantilever H-type submerged arc welding must have received systematic pre-job training and must have relevant operating certificates before they can work. Non-related personnel are prohibited from entering relevant work areas and operating equipment without authorization.
2. Before using the double cantilever H-beam submerged arc welding machine, the workers in the steel structure processing factory must check the relevant circuits of the machine to avoid circuit damage, ensure that the wires of each part are well connected, and at the same time check the outer shell of the machine control box. Cover it. After all inspections are completed, the work can be carried out.
3. During the operation, the workers in the processing plant must concentrate, pay attention to the operation status of the machine and whether the welding position of the steel structure components is correct, and must not leave the post without authorization.
maintenance measures
1. In addition to daily use inspections, workers in steel structure processing plants also need to conduct large-scale and comprehensive inspections of the machines on a regular basis to ensure that the lines remain completely insulated. If the line is found to be damaged during the inspection, it should be reported immediately and replaced.
2. The dust in the processing plant is relatively large, so the dust in the processing plant should be cleaned regularly to avoid the accumulation of dust on the machine and cause the machine to malfunction.
Regular maintenance of related machines can not only prolong the service life of the machines but also largely guarantee the safety of workers. Therefore, regular maintenance of the machine is necessary and necessary.
Customize your own Project now: lee@hy-steel.cn
Hongye Steel Structure is located in Dongguan and has more than 15 years of experience in the field of steel structure. We can provide customized product solutions for customers from all over the world.
lee@hy-steel.cn